Tagged: creality

Dragon Hotend Review - CR-10S PRO Direct Drive Setup

Dragon Hotend Review – CR-10S PRO Direct Drive setup

A few weeks ago, Trianglelab has released their new Dragon Hotend. This hotend takes features from multiple successful hotends like the E3D V6 and Mosquito Hotend and integrates them into a small and effective package. I ordered one, and decided to install it on the Creality CR-10S PRO...

CR-10S PRO Simplify 3D Profile for PETG

CR-10S PRO Simplify 3D Profile for PETG

I tuned my Simplify 3D profile for PETG, on the Creality CR-10S PRO. The results can be seen below. Settings: Layer Height – 0.15 mm Temp: 220C Speed: 60mm/s Retraction: 3mm at 50mm/s Coasting: 1mm CR-10S PRO Simplify 3D Profile for PETG You can download the profile by...

CR10S-PRO Prusa Slicer profile

CR10S-PRO Prusa Slicer profile

After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1. I tweaked the profile with a few test prints, and i find the results better than Cura. CR10S-PRO Prusa Slicer profile Feel free to download the profile from here. It...

CR-10S PRO Filament holder / Side Spool mount

Side Filament Holder for CR-10S PRO

This is a remix of the side Filament Spool Holder by builditfull, made to work with the Creality CR-10S PRO. It mounts on the side screws, and on the 2020 side-rail. I made it because i had a lot of Z wobble when printing at high speeds with...

Creality CR-10s Pro Custom Build Plate for Simplify 3D

Creality CR-10s Pro Custom Build Plate for Simplify 3D

Did you know that you can have a 3D representation of your printer inside the slicing software? The default build plate from Simplify 3D is functional, but boring. If we are customizing the printers in real life, then let’s also modify the looks in Simplify 3D. Here’s how...