Tagged: Simplify 3D

Artillery Genius Profile for Simplify3D and Prusa Slicer

Artillery Genius Profile for Simplify3D and Prusa Slicer

I previously reviewed the Artillery Genius which is an awesome printer. The stock profile is decent, but can be improved. After a few prints, i managed to dial in the profile and get really good results with it. Here is my tweaked Artillery Genius profile for Simplify 3D...

Sidewinder X1 profile for Simplify 3D e1581691908895

Sidewinder X1 profile for Simplify 3D

After the Artillery Sidewinder X1 calibration guide i did a few weeks ago, a lot of people asked me for the slicer profile. So here is the Sidewinder X1 profile for Simplify 3D Sidewinder X1 profile for Simplify 3D After testing various slicers and settings, i found out...

CR-10S PRO Simplify 3D Profile for PETG

CR-10S PRO Simplify 3D Profile for PETG

I tuned my Simplify 3D profile for PETG, on the Creality CR-10S PRO. The results can be seen below. Settings: Layer Height – 0.15 mm Temp: 220C Speed: 60mm/s Retraction: 3mm at 50mm/s Coasting: 1mm CR-10S PRO Simplify 3D Profile for PETG You can download the profile by...

Creality CR-10s Pro Custom Build Plate for Simplify 3D

Creality CR-10s Pro Custom Build Plate for Simplify 3D

Did you know that you can have a 3D representation of your printer inside the slicing software? The default build plate from Simplify 3D is functional, but boring. If we are customizing the printers in real life, then let’s also modify the looks in Simplify 3D. Here’s how...