Bed leveling is one of the most common issues when it comes to 3D printing. This bed leveling mod tries to fix this issue.Getting the bed leveling right takes a bit of fiddling around with the printer and can cause a lot of frustration for a beginner. With...
Today I will show you how to change a 3D printer nozzle correctly. I’ve seen a lot of posts on 3D printer groups where people were having issues with leaks after changing the 3D printer nozzle. Besides that, I just encountered a similar issue caused by improper nozzle...
In order to get a good finish and accurate dimensions of your printed parts, the flow rate of the printer needs to be properly calibrated. I put together an easy to use flow rate calculator which should help with flow rate calibration. Why do the Flow Rate Calibration...
The extruder calibration is one of the most important process to do for any 3D printer. By doing the extruder calibration, your printer will accurately extrude the exact amount of filament. This translates to much better finish on the printer parts and more accurate dimensions.Because this process is...
The Artillery Sidewinder X1 is awesome and the firmware it comes with is properly configured, but unfortunately it uses an older variant of the Marlin firmware and it lacks some features.It is recommended to upgrade the Artillery Sidewinder X1 to Marlin 2.0.5.3 in order to get all the...
I started using Prusa Slicer a lot more in the past few weeks with great results so i thought i make it look better. For each of my printers i added a custom build plate. This improves looks and it also makes it easier to see what printer...
Since the new Covid-19 pandemic started, the 3D printing community started to print masks and visors for medical professionals to help fight the virus. Here are a few tips on how to improve print times in order to finish those prints faster. Nozzle Size and Layer Height The...
The SKR 1.3 upgrade for the Sidewinder X1 is a big improvement over the stock configuration. It updates the printers’ capabilities to 32 bit, makes it a bit quieter and allows for easier firmware upgrades.I previously reviewed the Sidewinder X1 and it’s a good machine in its stock...
Beginners often have issues with the first layer when starting a print. It’s either a bit too high or too low causing issues with layer adhesion. If the nozzle is too high, the print will not adhere to the heated bed properly. If it’s too low there’s a...
OctoPrint is an open-source project that adds a lot more functionality for your 3D printing needs. From remote monitoring and better time estimations to gorgeous time-lapses, OctoPrint is the best tool to use in order to improve your 3D printing experience. In this article, I will show you...
Join the Discord channel
