Tagged: Sidewinder X1

Artillery Sidewinder X1 Auto Bed Leveling with Stock Sensor

Sidewinder X1 Auto Bed Leveling with Stock Sensor

The Sidewinder X1 Auto Bed Leveling Mod came to live because not everybody wants to spend over 35$ for an Original BLTouch sensor, I thought it would be nice to see if I can use the stock inductive sensor. And after testing it, I can safely say it’s...

Fix-Sidewinder-X1-Ribbon-Cable-Connection

Fix Sidewinder X1 Ribbon Cable Connection

The Sidewinder X1 ribbon cable is really nice when it comes to wire management. It was introduced for both the Sidewinder X1 and Genius, and it makes the printer look a lot more polished compared to other printers. Unfortunately, the connection is not great and because of the...

Artillery Bed Leveling Mod - Sidewinder X1 and Genius

Artillery Bed Leveling Mod – Sidewinder X1 and Genius

Bed leveling is one of the most common issues when it comes to 3D printing. This bed leveling mod tries to fix this issue.Getting the bed leveling right takes a bit of fiddling around with the printer and can cause a lot of frustration for a beginner. With...

Sidewinder X1 Upgrades - Paid and Free

Artillery Sidewinder X1 Upgrades – Paid and Free

If you were looking for Sidewinder X1 upgrades to do on your printer, you’ve come to the right place.In this article, I will share my recommended Sidewinder X1 upgrades with some feedback. This should make the decision easier when thinking about what Sidewinder X1 upgrades you can do...

Sidewinder X1 Firmware with Marlin 2.0.5.3

Artillery Sidewinder X1 Firmware with Marlin 2.0.5.3

The Artillery Sidewinder X1 is awesome and the firmware it comes with is properly configured, but unfortunately it uses an older variant of the Marlin firmware and it lacks some features.It is recommended to upgrade the Artillery Sidewinder X1 to Marlin 2.0.5.3 in order to get all the...

SKR 1.3 upgrade for Sidewinder X1

SKR 1.3 Upgrade for Sidewinder X1

The SKR 1.3 upgrade for the Sidewinder X1 is a big improvement over the stock configuration. It updates the printers’ capabilities to 32 bit, makes it a bit quieter and allows for easier firmware upgrades.I previously reviewed the Sidewinder X1 and it’s a good machine in its stock...

Custom Screen Firmware for Sidewinder X1 and Genius

Custom Screen Firmware for Sidewinder X1 and Genius

I am working on a guide for upgrading the Artillery Sidewinder X1 and Artillery Genius to 32bit with the BIGTREETECH SKR 1.3 and TMC2208. Unfortunately, the stock screen firmware has issues communicating with the board. I was looking for a fix online, and stumbled upon delwinbest’s github repo...

Artillery Genius Review

Artillery Genius Review – Is it any good?

If you are active in the 3D printing community, you probably heard about Artillery. It’s a company that produces quality 3D printers for an affordable price.I previously reviewed the Artillery Sidewinder X1 3D printer, and i loved it. In this article i will review the little brother in...

Artillery Sidewinder X1 calibration guide

Artillery Sidewinder X1 calibration guide

I noticed that there are a lot of people who experience Z banding, inconsistent extrusion or other issues in their prints. In my Sidewinder X1 review I went over some first checks a user should do when receiving and installing the printer for the first time.In the following...

Sidewinder X1 Waggster Mod BLTouch with improved Fan Duct

Sidewinder X1 Waggster Mod BLTouch improved Fan Duct

The Sidewinder X1 has a basic fan duct that works well, but the cooling is done only from one side. I wanted to improve this and because i am using a BLTouch with the Waggster Mod, there were limited options i could choose. So, the improved Fan Duct...