Tagged: Artillery Sidewinder X1

Custom Screen Firmware for Sidewinder X1 and Genius

Custom Screen Firmware for Sidewinder X1 and Genius

I am working on a guide for upgrading the Artillery Sidewinder X1 and Artillery Genius to 32bit with the BIGTREETECH SKR 1.3 and TMC2208. Unfortunately, the stock screen firmware has issues communicating with the board. I was looking for a fix online, and stumbled upon delwinbest’s github repo...

Sidewinder X1 profile for Simplify 3D

After the Artillery Sidewinder X1 calibration guide i did a few weeks ago, a lot of people asked me for the slicer profile. So here is the Sidewinder X1 profile for Simplify 3D Sidewinder X1 profile for Simplify 3D After testing various slicers and settings, i found out...

Artillery Sidewinder X1 calibration guide

Artillery Sidewinder X1 calibration guide

I noticed that there are a lot of people who experience Z banding, inconsistent extrusion or other issues in their prints. In my Sidewinder X1 review i went over some first checks a user should do when receiving and installing the printer for the first time. In the...

Sidewinder X1 Waggster Mod BLTouch improved Fan Duct

The Sidewinder X1 has a basic fan duct that works well, but the cooling is done only from one side. I wanted to improve this and because i am using a BLTouch with the Waggster Mod, there were limited options i could choose. So, the improved Fan Duct...

Artillery Sidewinder X1 (EVNOVO) Review

Artillery 3D (recently renamed in EVNOVO) is a Shenzhen company founded in October 2018 and it’s main focus is producing quality 3D Printers. One of the most popular printers made by EVNOVO is the Sidewinder X1. Today, we will review the Sidewinder X1 and test it’s functionality. Packaging...